Warning: Creating default object from empty value in /home/allabout/public_html/wp-content/themes/headlines_enhanced/functions/admin-hooks.php on line 160

How to Start a Kitchen Cabinet Refinishing

Remove the cabinet doors. I found an easy way to return the door to the right place once you have to remove: the number of each door in a discreet location in the timber (hinge s) and place a piece of tape over the number (the which is not accidental paint!) What was the same number within the cabinet frame (just inside the cabinet) by placing a piece of tape over too.

Sand cabinet doors and drawer fronts. Take the cabinet doors to the outside in an open arena, producing large amounts of dust. Wear a dust mask. Put some silver-cons in some easels and place the cabinet door above a surface mineable. Use a palm sander hand in hand with 50 grit sandpaper to make the closet door of untreated wood and ensure that the adhesive suitable for oil-based primer.

Sand the cabinet frames. Since you have the added challenge of sanding on the inside, you’ll want to avoid generating a lot of dust. Instead of conventional sandpaper, using a chemical solution called liquid sandpaper. Is slightly melt the varnish and cleaning the surface so that the oil-based primer can be applied.

Apply two coats of oil based primer on the doors and drawer fronts. Spraying a primer-based oil is more effective than the drying time is usually from 15 minutes between the layers of primers: the waiting time and much less in comparison with the expectations of the other initiators typical oil based. Sand between the layers. From the first coat of paint does not raise the grain of the wood, sanding will be easier. Wait at least 24 hours before applying finish coats of paint. Then brush or two coats of oil base waiting 24 hours between coats. Spray creates a smoother finish.

Apply two coats of oil-based primer for executives of the company. Brush painting. Allow to dry
Then prepare to discuss this point evident in the crack sealing plate and where the wall meets the cabinet structure, composed of glass works well for nail holes, either version painters putty, also a compound of putty should be applied to the joints of some of the cabinet frame to hide just where cabinets are to restore the sand between coats. Apply two coats oil base. 24 hours between layers.

Finally, some advice. Painting requires a great amount of skill, patience and attention to detail that can only be learned through experience. The kitchen is the focal point inside the house. You want a factory finish, not just a coat of paint. Painting kitchen cabinets is a profession. Hiring a real architect to manage the project is a much cheaper option compared to purchasing and installing a new set of kitchen cabinets.

Category: kitchen